6:30-8:30 Sunday evening I’ll be running a CNC Checkout.
Please respond here if you’ll be participating. I have a cap of 6 members for this checkout, it takes about two hours. We’ll be covering the program to run the CNC and the machine itself
I also still need to acquire physical material for this checkout
I’m technically checked out already but I could definitely use a refresher!
1 Like
I’m in!
1 Like
May I join? I just visited LMN for the first time tonight and got a tour. The CNC is the big draw for me, so I’d love to participate.
Thank you!
1 Like
@John please do!
1 Like
I would like to participate in the cnc checkout .
thankyou
mike fraleigh cell 517 7192397
@Evelyn how big of a piece of material do you need for the demo? I can pick up a piece of plywood or MDF but can’t fit a full sheet in my car.
Thank you for offering!
I’m going to need a couple pieces and it’s most economical to get it out if a 4x8 sheet.
Anybody going to this checkout have a truck?
My apologies, my confusion came from how to purchase it and do the purchase rec. I have a truck, and I’ll be getting the 4x8 sheet tomorrow morning
I’ve been given the link and the go ahead to get it
If there is space for one more, I’d like a refresher as well. Thanks Evelyn!
1 Like
Please do!
Oh sweet!
I’d like to participate as well.
Al
1 Like
@Evelyn thank you thank you for running this! I would like to join! If there is still an open spot left I may have a +1 but they are not a member or prospective so I’ll hold off and see if it fills.
Hi @John!! Rachel and I gave your tour this past Thursday! I’m really glad you can make this checkout!
1 Like
Thanks again for the tour! The timing was very serendipitous and I’m happy to be able to attend.
Please do!
If there is an available slot, I’d love to participate! I’m here now. Thank you
Steve
Hi all, the air compressor draining procedure was correct
@RealCarlRaymond , do we have the ability to use V-carve at home?
1 Like